| Bearcat 1/5 | P40B-1/5.5 | SBD 1/5.5 | Spitfire 1/5.3 Mk1-MK9 | CG'er Stand |
| P51B - 1/4 | P40B - 1/3.5 | Hellcat - 1/5 | P38 - 1/7 | TBD |
| P51B - 1/5 | P51A - 1/5 | LA-7 - 1/4 | Seafury - 1/5.5 |
|
|
|
1/7th Scale, 88" wing span. 22-26lbs, .90-120 2 stroke or small 20cc gas engine . Retracts options Robarts, TBA Sierra Giant Retracts This is a epozy fiberglass composite structure with ply support already installed. The process to make this kit takes 30-40 hours. Parts include scale detail panel lines and hatches . Lower portion of the cowls are designed to facilitate access to fuel tanks, trottle servos and carburator. Gear doors are fully molded and shaped to fit the fuse center sections. Entire airframe (all fiberglass parts) weigh in under 10 lbs. Nose cone is used to access retract fill valve, radio switches and fuel filling valve.
|
| Item |
Picture | Description |
| Fiberglass Fuse |  |
Epoxy glass fuse, consists of center section with pod, booms, horizontal stab, upper and lower fins. With scale panel lines and raised hatches |
| Canopy and Frame |  |
Clear canopy and fiberglass framing |
| Wing |  |
Outer wing panels are hollow core molded with panel lines. Ribs and support already installed. |
| Gear doors | 
 |
Epoxy glass 4 blade (static display only) |
| Turbo chargers | 
 |
Scale turbo chargers, with side intake scoops |
| Nose cone |  |
3 sheet plans - Also available from Bob Holman Plans |
| Rudders |  |
Clear Canopy - Also available from Bob Holman Plans |
| Cowlings | 
 |
Fiberglass cowls, permits easy access to fuel tank and throttle servo |
| Retracts | Robart Retracts. TBA Sierran GFiant Landing Gear |